NEUTRALÈNE® N 57 R
INDUSTRIAL DEGREASER SOLVENT
OPTIMIZED FLASHPOINT/EVAPORATION SPEED RATIO
NOT CLASSIFIED FLAMMABLE
REGULATIONS CLP CE 1272 GHS
ENHANCED SOLVENT POWER FOR DISPOSAL
OF OILS, GREASES, WAXES
DEGREASING SOLVENT FOR DEGREASING FOUNTAINS
DEGREASING IN INDUSTRIAL MAINTENANCE, IN GENERAL MECHANICS
REMOVAL OF FRESH INKS FOR FLEXOGRAPHY-HELIOGRAPHY
Mixture of narrow-cut hydrocarbons to obtain a high rate of evaporation for maximum flash point. Hydrotreated by catalysis NEUTRALÈNE® N 57 R is completely free of fragrances and benzene.
This product is intended for degreasing operations in mechanics and industrial maintenance, but its great neutrality concerning plastics allows it to be used in many other fields. Degreasing solvent for cleaning fountains.
|
|
FLASH POINT 64°C NF EN ISO 2719 CLP CE 1272/2008 SGH EU Regulation 2015/1221
EVAPORATINO SPEED 40mn DEGREASING POWER 50 (Kauri Butanol index ASTM D 1133)
|
|
AREAS OF USE
Cleaning and degreasing of mechanical components, bearings, rollers, slides, racks, power transmissions, information transmissions.
Cleaning of returnable electrical equipment.
Industrial maintenance.
Cleaning operation in assembly workshops.
Degreasing operation in solvent cleaning fountains.
Elimination of fresh inks in flexography and heliography printing.
Degreasing of lubrication oils, machining oils, greases, protective waxes.
Elimination of silicone oils.
 |
 |
|
Dégreasing mechanical components |
Cleaning inks on flexography cylinders |
DIRECTIONS
Use pure.
Elimination with mechanical action, rag, paintbrush, brush, low pressure sprayer.
Degreasing fountains.
Do not use in ultrasonic tanks.
"Dangerous. Respect the directions of use".
PHYSICO-CHEMICAL CHARACTERISTICS
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Appearance |
Visual |
Clear |
- |
|
Colour* |
Visual |
Colourless |
- |
|
Odour |
Olfactory |
Light |
- |
|
Density at 25°C |
NF EN ISO 12185 |
806 |
kg/m3 |
|
Refractive index |
ISO 5661 |
1.4300 |
- |
|
Freezing point |
ISO 3016 |
-50 |
°C |
|
Solubility in water |
- |
Insoluble |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
1.1 |
mm²/s |
|
Acid index |
EN 14104 |
0 |
mg(KOH)/g |
|
Iodine index |
NF EN 14111 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
0.005 |
% |
|
Residual after evaporation |
NF T 30-084 |
0 |
% |
|
PERFORMANCE CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Kauri Butanol Index |
ASTM D 1133 |
50 |
- |
|
Evaporation rate |
- |
40 |
min |
|
Surface tension at 20° C |
ISO 6295 |
26.7 |
Dyne/cm |
|
Corrosion of copper strip 100h at 40° C |
ISO 2160 |
1a |
Quote |
|
FIRE SAFETY CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Flash point (closed vessel) |
ISO 2719 |
64 |
°C |
|
Self-ignition point |
ASTM E 659 |
> 230 |
°C |
|
Lower explosive limit |
NF EN 1839 |
0.7 |
% (volume) |
|
Upper explosive limit |
NF EN 1839 |
7.0 |
% (volume) |
|
Content of explosive, oxidizing, flammable, highly or extremely flammable substances |
CLP Regulation |
0 |
% |
|
TOXICOLOGICAL CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Anisidine index |
NF ISO 6885 |
nm |
- |
|
Peroxide index |
NF ISO 3960 |
nm |
meq(O2)/kg |
|
TOTOX (anisidine index+2x peroxide index) |
- |
nm |
- |
|
Content of CMR, irritants, corrosives substances |
CLP Regulation |
0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
% |
|
Emissions of hazardous compounds, CMR, irritants, corrosive at 160°C. |
GC-MS |
0 |
% |
|
ENVIRONMENTAL CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Biodegradability |
OCDE 301 |
easily biodegradable |
- |
|
Vapour pressure at 20° C |
- |
0.38 |
hPa |
|
VOC content (Volatile Organic Compounds) |
- |
100 |
% |
|
Sulphur content |
GC MS |
0 |
% |
|
Benzene content |
ASTM D6229 |
0 |
% |
|
Total halogen content |
GC MS |
0 |
% |
|
Chlorinated solvents content |
- |
0.00 |
% |
|
Aromatic solvent content |
- |
0.00 |
% |
|
Substances dangerous for the environment content |
CLP Regulation |
0 |
% |
|
Content of compounds with PRP |
- |
0 |
% |
|
Content of compounds with ODP |
- |
0 |
% |
|
Carbon footprint, life cycle analysis. |
ISO 14040 |
nm |
Kg Carbon equivalent |
* unmeasured or unmeasurable
PRESENTATIONS
|
Container GRV 1000 L
|
Drum 200 L
|
Can 20 L |
|
a |
METHODS OF USE
 |
 |
| Degreasing rag | Degreasing with brush |
 |
|
|
Solvents fountains |
Hot and cols immersion tanks |
 |
|
| Rotating or translating basket | Washing machines A3 |
