NEUTRALENE RG 30
IMMEDIATELY REPLACES ACETONE
30°C Flash point in a vacuum
Evaporation rate 4'30 at 20°C
.jpg)
Acetone is extremely flammable. With a flash point of -18°C, it is a particularly dangerous solvent to use. In addition, fumes form explosive mixtures in the air.
With a vapor pressure of 27.4 kPa, acetone is very volatile, comparable to ether, and its application requires repeating several times to obtain good cleaning. If its price seems economical, the quantities that need to be used are significant, not to mention the unavoidable losses through evaporation.
Acetone is not without risk in terms of health:
- Irritation of the skin and mucous membranes,
- Serious Cat.2 eye damage,
- Central nervous system depression in cases of high exposure,
- Headache, dizziness, intoxication, comas, in certain convulsive cases,
- Nausea, vomiting, hematemesis, metabolic acidosis,
- Cat.3 narcotic effects,
- Specific toxicity for certain target organs,
- Obligatory exposure value 500 ppm Art. 4412-149 of the Labour Code.
As a reminder, any storage, implementation or use of an extremely flammable liquid must be declared to the insurance companies.
All regulations applicable to the use of acetone are listed on www.substitutionacetone.com.
Sources
inrs.fr FT 3 acetone
vulgaris-medical.com Acetone toxicity
csst.qc.ca Acetone
It is forbidden to market acetone in many countries. Acetone is used for the purification of cocaine. Catalyzed with hydrochloric acid, it is easy to make TATP, a powerful explosive used in terrorist acts.
NEUTRALENE RG 30 immediately dissolves:
- Polyester resins
- Epoxy resins
- Gelcoat, including hybrids
Cleaning application tools or roller tools, laminating
Cleaning polyester or epoxy gel coats
in shipbuilding or in repair yards
AREAS OF USE
Cleaning rollers, de-icers and application tools for the implementation of polyester resins and epoxies.
NEUTRALENE RG 30 has an optimized evaporation rate allowing effective action even on highly reactive resins having a short TECAM gel time of a few minutes.
|
UPR RESINS Aliphatic Homopolymers PGA PLA PGL PCL PHA PHB Aliphatic co-polyesters PEA PBS Semi-aromatic co-polyesters FBT PTT PEN Homo and aromatic co-polyesters Polyacrylates Hybrid polyester polyesters - epoxies |
EPOXY RESINS Epichlorohydrin ECH BPA Bisphenol Aliphatic Glycol Phenolic novolacs o-Cresols Hydantoins (urea glycols) Brominates, acrylates |
|
|
EPOXY HARDENERS DDM MDA Polyisocyanates Aliphatic amines Base anhydrides TGIC (triglyceride isocyanates) |
NEUTRALENE RG 30 is an azeotrope, its distillation point is 125°C. It is easily recoverable, distillable and reusable, without any loss of its physicochemical qualities.
The distillation point can be lowered by about 30% when using a vacuum distiller. The distillation is then total and extremely fast, at 90°C.
PHYSICO-CHEMICAL CHARACTERISTICS
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Aspect |
Visual |
Limpid |
- |
|
Colour |
Visual |
Colourless |
- |
|
Odour |
Olfactory |
Characteristics |
- |
|
Density at 25°C |
NF EN ISO 12185 |
889 |
kg/m3 |
|
Refractive index |
ISO 5661 |
1.3970 |
- |
|
Freezing point |
ISO 3016 |
-50 |
°C |
|
Boiling - Distillation |
ISO 3405 |
119-126 |
°C |
|
Vapour pressure 20°C |
ASTM D 5188
EN 13016.1.2.3 |
1,2 | kPa |
|
Solubility in water |
- |
0.01 |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
0.86 |
mm²/s |
|
Acid number |
EN 14104 |
<1 |
mg(KOH)/g |
|
Iodine index |
NF EN 14111 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
<0.1 |
% |
|
Residue after evaporation |
NF T 30-084 |
0 |
% |
|
PERFORMANCE CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
KB Index |
ASTM D 1133 |
>150 |
- |
|
Evaporation rate |
- |
4.30 |
minutes |
|
Surface tension at 20°C |
ISO 6295 |
27.5 |
Dyne/ cm |
|
Copper blade corrosion 100hrs at 40°C |
ISO 2160 |
1a |
Rating |
|
FIRE SAFETY CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Flash point (vacuum) |
NF EN 22719 |
29 |
°C |
|
Self-ignition point |
ASTM E 659 |
>230 |
°C |
|
Lower explosive limit |
NF EN 1839 |
1,2 |
% (volume) |
|
Upper explosive limit |
NF EN 1839 |
13,7 |
% (volume) |
|
TOXICOLOGICAL CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Content of CMR substances, irritating, corrosive |
CLP Regulation |
0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
% |
|
ENVIRONMENTAL CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Water hazard |
WGK in German |
1 not hazardous to water |
class |
|
Primary biodegradability CEC 21 days at 25°C |
L 33 T82 |
>70 |
% |
|
Ready biodegradability OECD 301 A in 28 days Disappearance of COD |
ISO 7827 |
>70 |
% |
|
Ready and ultimate biodegradability OECD 301 D in 28 days Biodegradation at 67 days |
MITI modified |
72 |
|
PRESENTATIONS
IBC GRV 1000 L
|
Drum 200 L |
Can 20 L |
Can 5 L |
Download the data sheet