DECAP STRIP VG
LIQUID STRIPPER
PLANT-BASED
BIOSOURCED
Guaranteed without methylene chloride, without NEP,
without NMP
without caustic soda, without formic acid
NON-FLAMMABLE BIODEGRADABLE
QUICK STRIPPING OF ALL PAINTS, RESINS, VARNISHES
ON ALL SUBSTRATES, ALL MEDIA
DESCRIPTION
Stripping techniques, chemicals, acidic, by burning, by dry pyrolysis (Dry Stripping), mechanical, by sanding, sandblasting, bead blasting, depend on the nature of the substrates, their size, their accessibility, and their possibilities to be eventually dismantled and transported to an external subcontractor.
Chemical stripping
Most components of fast-acting strippers on a wide variety of paints contain CMR (Carcinogenic Mutagenic or Reprotoxic products) such as Methylene Chloride, NMP or NEP.
DECAP STRIP VG is part of the new generation of fast-acting strippers, based on plant-based bio-sourced derivatives. It is therefore used in ecological chemical stripping operations.
DECAP STRIP VG is not classified as flammable, is easily biodegradable, is without solvent containing a PRP, and is part of the reduction of VOC emissions.
Usable on Paints or liquid coatings or powders
Natural Siccative Alkyds (glycerol)
Cellulose Polyesters
Rubbers Phenolic (resoles)
Vinyl Aminoplast
Acrylics Epoxy
Polyurethanes Polyurea
This stripper can also be used for the removal of "intelligent" photocatalytic paints and varnishes, electro-magnetic insulators, photochromes, hydrophobics with Lotus effect, technical and special varnishes for glazing.
TYPICAL PHYSICO-CHEMICAL CHARACTERISTICS
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Appearance |
Visual |
Clear |
- |
|
Colour |
Visual |
Yellow |
- |
|
Odour |
Olfactory |
Light |
- |
|
Density at 25°C |
NF EN ISO 12185 |
978 |
kg/m3 |
|
Refractive index |
ISO 5661 |
1.4490 |
- |
|
Freezing point |
ISO 3016 |
-4 |
°C |
|
Solubility in water |
- |
partial |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
3.0 |
mm²/s |
|
Flow time Cup 6 at 25°C |
NF EN ISO 2431 |
nm |
|
|
Acid index |
EN 14104 |
<1 |
mg(KOH)/g |
|
Iodine index |
NF EN 14111 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
<1 |
% |
|
Residual after evaporation |
NF T 30-084 |
<0.1 |
% |
|
PERFORMANCE CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
KB Index |
ASTM D 1133 |
>180 |
- |
|
Evaporation rate |
- |
>3 |
hours |
|
Volatility index nBuAC=1 |
NF T 30.30 |
1.4 |
Quotient |
|
Evaporation index DEE=1 |
DIN 53.170 |
nm |
Quotient |
|
Surface tension at 20° C |
ISO 6295 |
32 |
Dyne/cm |
|
Corrosion of copper strip 100h at 40° C |
ISO 2160 |
1b |
Quote |
|
Aniline point |
ISO 2977 |
nm |
°C |
|
FIRE SAFETY CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Flash point (closed vessel) |
NF EN 22719 |
95 |
°C |
|
Self-ignition point |
ASTM E 659 |
>200 |
°C |
|
Lower explosive limit |
NF EN 1839 |
2.6 |
% (volume) |
|
Upper explosive limit |
NF EN 1839 |
28.5 |
% (volume) |
|
Content of explosive, oxidizing, flammable, highly or extremely flammable substances |
CLP Regulation |
0 |
% |
|
TOXICOLOGICAL CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Anisidine index |
NF ISO 6885 |
<2 |
- |
|
Peroxide index |
NF ISO 3960 |
<5 |
meq(O2)/kg |
|
TOTOX (anisidine index+2x peroxide index) |
- |
nm |
- |
|
Content of CMR, irritants, corrosives substances |
CLP Regulation |
0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
% |
|
ENVIRONMENTAL CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Effect to water |
WGK Germany |
1 safe for water |
class |
|
Primary biodegradability CEC 21 days at 25°C |
L 33 T82 |
>80 |
% |
|
Easy biodegradability OECD 301 A over 28 days Disappearance of the COD |
ISO 7827 |
>80 |
% |
|
Easy and ultimate biodegradability OECD 301 D over 28 days Biodegradation at 67 days |
Modified MITI |
>70 |
% |
|
Bioaccumulation n-octanol water sharing index |
OCDE 107 |
-1.35 |
Log KOW |
|
Vapour pressure at 20° C |
- |
<0.1 |
hPa |
|
VOC content (Volatile Organic Compounds) |
- |
Unmeasured carbon content |
% |
|
Total halogen content (Chlorine Fluorine Bromine) |
Calorimetric bomb GC MS |
0 |
% |
|
Benzene content |
LPCH |
0 |
% |
|
Aromatic solvent content |
LPCH |
0 |
% |
|
Substances dangerous for the environment content |
- |
0 |
% |
|
Content of compounds with PRP |
- |
0 |
% |
|
Content of compounds with ODP |
- |
0 |
% |
Safety precautions: if this product disintegrates and requires reconditioning, do not use metal packaging.
Download the data sheet